If your inverter or battery has gone offline (for example after changing your router, SSID, or Wi-Fi password), you can reconnect it using your browser.
- Use a laptop, tablet, or phone that can connect to Wi-Fi.
- Disconnect from your home Wi-Fi.
- Connect to the inverter’s Wi-Fi network (it will appear as a string of letters/numbers).
- Open a browser and type 10.10.100.254 in the address bar.
- Log in with:
- Username: admin
- Password: admin (unless you’ve changed it).
- Set STA mode and transparent mode, then click Apply.
- Go to STA interface setting → Search.
- Select your home 2.4GHz Wi-Fi and check signal strength (RSSI).
- Below 60% may cause issues.
- Enter your Wi-Fi password, set security to WPA2, and click Apply.
- Reboot the module via Device Management → Restart.
Troubleshooting:
- Double-check Wi-Fi password entry (case-sensitive).
- Ensure you’re connecting to 2.4GHz, not 5GHz.
- If connection fails, repeat steps carefully.
When to Contact Support:
If you cannot reconnect after multiple attempts.